Menu

## Sound Operated Light

While living in rent or in hostel the problem like stealing is often in absent time. Here is the circuit of simple and inexpensive sound – operated light to overcome this type of problem which can turn on the light when someone claps, or tries to open your door or even inserts a key in the door lock. The switching of light is alternately i.e. light on by one sound pulse and off by another. It is also called clap operated light or clap switch.

### Circuit Description of sound operated light

The entire circuit of sound operated light is designed and builds around an operational amplifier IC (IC1) and JK flip-flop IC (IC2). The sound coming from outside is senses by microphone and converts it to corresponding electrical signal where sensitivity of sound is controlled by potentiometer VR1. The high value of reference voltage is given to pin 3 of IC1 in order to change the output voltage from pin 6. Here IC2 (JK flip-flop) is wired as a toggle flip-flop and its output is connected to relay driver transistor T1 through resistor R1 which energized the relay RL1 when sound is heard by microphone. The bulb from sound operated light is connected to AC source through relay contact as shown in circuit diagram.

### PARTS LIST

Resistors (all ¼-watt, ± 5% Carbon)

R1 = 22 KΩ

R2, R5 = 1 KΩ

R3 = 470 Ω

R4 = 10 KΩ

VR1 = 10 KΩ

C1 = 0.1 µF

C2 = 470 µF/35V

#### Semiconductors

IC1 = µA741 (operational amplifier)

IC2 = CD4027

T1 = 2N2222

D1, D2 = 1N4001

#### Miscellaneous

X1 = 230V AC primary to 0-9V, 250 mA secondary transformer

OR

(110V AC primary to 0-9V, 250 mA secondary transformer)

RL1 = 12V, 200Ω, 1C/O Relay

SW1 = ON/OFF Switch

F1 = Fuse

MIC = Condenser Microphone

Bulb 230V, 60W (110V, 60W)

## 13 thoughts on “Sound Operated Light”

1. ayo says:

pls wat is d variable value

2. Mills Felix says:

I tried it n it actually worked … work better wif 12v transformer & a 400 ohms relay

3. Zishan says:

Can i Use 12 V 500 Ma Transformer.Also What is the Ampere Value Of Relay,Can I use A relay of 12 V 5 A.

4. kunle says:

helo its not working. i use a screw driver to touch the pin 13 of ic2 wic turns on the bulb. wen i clap it does not wrk it is working as the bulb is directly connected to the relay independently the other circuitry.

5. cedur says:

thank for all what you do for us learner or biginer in electronic can you kep somme time in
front pdf of our suggetion (PCB circuit diagramme …) i would like to receive also applications
of simulation . you are the best .

6. Akiram says:

I just wanted to know that whether this circuit is working or not? I checked the same circuit once but it is not working.
Please reply as soon as possible.

7. PIT says:

Hi, I built the circuit but only when clapping loud close to mic does it switch. Is this how it should be.
Thanks

8. usha tiwari says:

Plz give full specification
Give the minimum&maximum full price

9. Malingunde says:

let me try it

10. Anonymous says:

what is the black thing right below R1, and left side of VR1 and R3? please clear it, thanx

11. shyam sunder says:

built this circuits,but it does not work, rebuilt and checked etc but still does not work. CD 4027 does not respond.