## Programmable electronics dice project

Dice game is very interesting indoor game mostly played in childhood. Here is verified game project programmable electronics dice useful in many game.  With the help of this project we can display any number between 1 to 9 according to our dip switch setting.

### Circuit description of programmable electronics dice

The project programmable electronics dice comprises three ICs as heart and for output a common anode display. Here, IC1 used is a dual 4-input Schmitt trigger NAND gate IC where gate N1 used as frequency generator which generate the clock frequency of 70kHz with the help of resistor R2 and capacitor C1 and gate N2 load data at the input of IC2. Where IC2 is a presettable binary counter with the facilities of parallel loading. Lastly the output of IC2 is displayed on common-anode, 7-segmant display with the help of IC3 which is BCD-to-7-segmant decoder and the resistor R8 is used as current limiter.

#### Setting for the 4-way DIP switch for display range

 Dice Range Close the inner switch Open the inner switch 1 to 2 B and A D and C 1 to 3 C only A, B and D 1 to 4 A and C B and D 1 to 5 B and C A and D 1 to 6 A, B and C D only 1 to 7 D only A, B and C 1 to 8 A and D B and C 1 to 9 B and D A and C

### PARTS LIST

Resistors (all ¼-watt, ± 5% Carbon)

R1 = 1 KΩ

R2 = 100 Ω

R3 – R7 = 4.7 KΩ

R8 = 220 Ω

C1 = 0.1 µF

#### Semiconductors

IC1 = 74LS13, dual 4-input Schmitt trigger NAND gate IC

IC2 = 74LS191, presettable binary counter with parallel facility

IC3 = 7474, BCD-to-7-segmant decoder

#### Miscellaneous

DIS-1­ = LTS542 common anode display of equivalent

SW1 = ON/OFF switch

SW2 = 4-way dip switch

Related Project

1. Electronics Cricket on Board interesting project, even a single player can play this game.
2. Game Circuit for Steady Hand use to check the state of sobriety, built for your birthday party, friends outs or even for your mid term project
3. Electronics Gambling Game Play gambling game in your own project