add
add
Menu

Man Machine Sound generator


There are different type of sound generating or alarm or siren project available in different website. Here is the simple, inexpensive but different type of sound generator circuit in the series of alarm project. The project man mechine sound generator in this website is mostly used by ticker. It produced different type of man as well as machine sound

Circuit description of man machine sound generator

The circuit man machine sound generator is build and fabricated around timer IC NE555 (IC1) and two transistors. Timer IC (IC1) is configured as astable multivibrator and two transistors is used as clock oscillator. Oscillated frequency is dependent upon resistors R1 & R2 and capacitors C1 and C2. Clock pulse from transistor is given to pin no 5 of IC1 through resistor R5. The LEDs connected to collector of each transistor indicate the sound intensity. The output from pin 3 of IC1 is fed to loudspeaker through capacitor C3.

alarm project

PARTS LIST

Resistors (all ¼-watt, ± 5% Carbon)

R1, R2 = 4.7 KΩ

R3, R4 = 330 Ω

R5, R6 = 1 KΩ

Capacitors

C1 = 1000 µF/16V

C2 = 10 µF/16V

C3 = 100 µF/16V

C4 = 4.7 µF/16V

Semiconductors

IC1 = NE555 (Timer IC)

T1, T2 = BC148 or BC548

Miscellaneous

LED1 = RED

LED2 = GREEN

LS1 = 8Ω loud speaker

 

 

Related Project

  1. 2-tone-door-bell Generated a ding-dong sound similar to an electrical bell
  2. Beeper and Visual Indicator visual indicator lights up with each beep having the same time period.
  3. Electronic Clapper produces clap sound, and can be used to control the devices
  4. Multi Sound Generator use 3V DC battery to operate instead of AC mains, with good quality sound.
  5. Simple Electronics Siren simple circuit of siren build around single chip CD4011 (IC1)

Leave a Reply

Your email address will not be published. Required fields are marked *