add
add
Menu

Flasher With Beeper

Here is the simple but interesting project flasher with beeper, can be used in automobile and other application. It can be used as flasher beeper in scooter, motorcycle etc where there is no facilities of beeper with flasher.

Working of the circuit of flasher with flasher with beeper

The heart of the circuit flasher with beeper is IC1 (LM 555) which is used as 1 kHz astable multivibrator. When the circuit flasher with beeper is connected to the power (from turn indicator switch of scooter), output of 1 kHz frequency is obtained from pin number 3 of IC1 (LM555). This frequency is given to speaker through R3 and C2 and beeper sound is heard.

Using Method of flasher with beeper

The circuit of flasher with beeper can be used only to those vehicles, having the facilities of Turn Indicator Switch. Connection diagram is shown in figure 2. Two signal diodes is connected to left and right side each of switch and connected to point A (for power supply).

PARTS LIST

Resistors (all ¼-watt, ± 5% Carbon)

R1 = 4.7 KΩ

R2 = 10 KΩ

R3 = 68Ω

Capacitors

C1 = 100 KPF (104 ceramic)

C2 = 10 µF/10V

Semiconductors

D1, D2 = 1N4007

IC1  = LM555 Timer IC

Miscellaneous

Speaker 8 Ω

 

 

Related Project

  1. 2-tone-door-bell Generated a ding-dong sound similar to an electrical bell
  2. Beeper and Visual Indicator visual indicator lights up with each beep having the same time period.
  3. Man Machine Sound Generator produced different type of man as well as machine sound
  4. Multi Sound Generator use 3V DC battery to operate instead of AC mains, with good quality sound.
  5. Simple Electronics Siren simple circuit of siren build around single chip CD4011 (IC1)

Leave a Reply

Your email address will not be published. Required fields are marked *